Artículos Publicados en Congresos Internacionales
|
No
|
|
41
|
Vargas-Soto J.E., Pedraza-Ortega J.C., Ramos-Arreguín
J.M., López-Vallejo Lilia "Desarrollo de Proyectos Mecatrónicos",
VIII Congreso Internacional de Ingeniería Mecánica y Mecatrónica. Abril
10-12 y Mayo 29-31, 2014. pp. 38-42, ISBN: 978-607-95347-9-0.Grupo LOC,
Asociación Mexicana de Mecatrónica A.C.
|
40
|
Vargas-Soto J.E., Aceves-Fernández M.A.,
Sotomayor-Olmedo A., Tovar-Arriaga Saúl y Rodríguez-Reséndiz J., "Perspectivas
de la Ingeniería Mecatrónica", VIII Congreso
Internacional de Ingeniería Mecánica y Mecatrónica. Abril 10-12 y Mayo
29-31, 2014. pp. 1-6 ISBN: 978-607-95347-9-0.Grupo LOC, Asociación
Mexicana de Mecatrónica A.C.
|
39
|
Eduardo
Rodriguez, Marco A. Aceves-Fernandez, Juan M. Ramos-Arreguín, Saúl
TovarArriaga, J. Carlos Pedraza-Ortega, J. Emilio Vargas-Soto, "Design and Implementation of an Embedded
Wireless System to Monitor a Hall-Effect Gas Sensor at a Household", Proceedings of the IEEE Electronics, Robotics and Automotive
Mechanics Conference CERMA 2012, Cuernavaca, Morelos, Septiembre, 2012.
|
38
|
Carlos
Alberto Ramos Arreguín, Juan Carlos Moya Morales, Juan Manuel Ramos
Arreguín, Jesús Carlos Pedraza Ortega, Marco Antonio Aceves Fernández, José Emilio Vargas Soto,
Saúl Tovar Arriaga, "Metodología para Almacenamiento de Imágenes en Memorias
externas de tipo RAM, empleando FPGA", 9o. Congreso
Internacional sobre Innovación y Desarrollo Tecnológico (CIINDET),
Noviembre 2011.
|
37
|
Artemio
Sotomayor-Olmedo, M. Antonio Aceves-Fernandez, Efren Gorrostieta-Hurtado,
J. Carlos Pedraza-Ortega, J. Emilio Vargas-Soto, J. Manuel Ramos-Arreguin, U.
Villaseñor-Carillo, "Evaluating Trends of Airborne Contaminants by
using Support Vector Regression Techniques" 21st International
Conference on Electronics, Communications and Computers CONIELECOMP, pp.
137-141, February 2011.
|
36
|
Carlos
Alberto Ramos Arreguín, Orlando Marcos Cora Gallardo, Juan Manuel Ramos
Arreguín, Jesús Carlos Pedraza Ortega, Sandra Luz Canchola Magdaleno, José Emilio Vargas Soto,
"Metodología para manejo de imágenes en FPGA", 6to.
Congreso Internacional de Ingeniería, Querétaro, Qro., Mayo, pp. 219-226,
ISBN: 9786077740391, 2010.
|
35
|
Artemio
Sotomayor Olmedo, Zaira Yared González Servín, Moya Morales Juan Carlos,
Efrén Gorrostieta Hurtado, Jesús Carlos Pedraza Ortega, José Emilio Vargas Soto,
"Modelado Difuso de un Invernadero de Jitomate
utilizando Técnicas de Clustering", 6to.
Congreso Internacional de Ingeniería, Querétaro, Qro., Mayo, pp. 91-99,
ISBN: 9786077740391, 2010.
|
34
|
E. Guillen García, O.M. Cora Gallardo, J.M.
Ramos Arreguín, C.A. Ramos Arreguín, J.E. Vargas Soto, M. Delgado Rosas, "Desarrollo e Implementación
de un Sistema Difuso para un Robot Neumático con Software de Monitoreo", VIII Congreso Internacional sobre Innovación y Desarrollo
Tecnológico (CIINDET 2010), IEEE sección Morelos, pp. 407-312.ISBN:
978-607-95255-2-1,Noviembre
24-26, 2010. Cuernavaca Morelos, México.
|
|
Ubaldo Geovanni Villaseñor Carrillo, Marco
Antonio González Aguirre, Artemio Sotomayor Olmedo, Efren Gorrostieta
Hurtado, Jesús Carlos Pedraza Ortega, José Emilio Vargas Soto and Saúl Tovar
Arriaga, "Desarrollo
de un Sistema de Navegación para Robots Móviles Mediante Diferentes
Patrones de Comportamientos", VIII
Congreso Internacional sobre Innovación y Desarrollo Tecnológico (CIINDET
2010) , IEEE sección Morelos, pp. 407-312.ISBN: 978-607-95255-2-1,Noviembre 24-26, 2010. Cuernavaca
Morelos, México.
|
|
Artemio Sotomayor Olmedo, M. Antonio Aceves
Fernández, Efren Gorrostieta Hurtado, J. Carlos Pedraza Ortega, J. Manuel
Ramos Arreguín, J.
Emilio Vargas Soto, Saúl Tovar Arriaga. "Modeling Trends of Airborne Perticulate Matter by
Using Support Vector Machines", 7th
International Conference of Electrical and Electronics Engineering
Research (CIIIEE 2010), IEEE Aguascalientes and Instituto Tecnológico de
Aguascalientes,pp. 42-46, ISBN:
978-607-95060-3-2,November 10-12,
2010. Aguascalientes, México.
|
31
|
Vargas-Soto E. ,"Teaching
Mechatronics with Real Projects and Integral Vision", Clute Institute for Academic Research, Proc. of the Teaching and
Learning Conference, ISSN 1539-8757, Salzburg, Austria, Junio 23-26, 2008.
|
30
|
Vargas E. and Chavez
R.,"Teaching
Mechatronics for New Business", Clute Institute for Academic Research, Proc. of the European
Applied Business Research Conference, ISSN 1539-8757,Rothenberg
ob der Tauber, Germany, Junio 18-20, 2008.
|
29
|
J.M. Ramos, E. Gorrostieta, E. Vargas,J.C. Pedraza,R.J. Romero y B. Ramírez, "Pneumatic Fuzzy Controller for a Flexible Arm",
13th IEEE/IFAC International Conference on Methods and Models
in Automation and Robotics,MMAR2007,
ISBN 978-83-751803-2-9, Szczecin, Poland. 27-30 August, 2007.
|
28
|
J.M. Ramos, E. Vargas, E.
Gorrostieta, R.J. Romero y P. Callmell,
"PID Control for a
Pneumatic Cylinder of a Manipulator Robot", 10th Internacional Conference on Mechatronics and Technology.
ICMR 06 ITESM, Mexico City, 20th – 24th November, 2006
|
27
|
J.M. Ramos, E. Gorrostieta, E. Vargas,J.C. Pedraza,R.J. Romero y B. Ramírez, "Pneumatic Cylinder
Control for a Flexible Manipulators Robot", 12th
International Conference on Methods and Models in Automation and
Robotics, MMAR2006, ISBN 978-83-60140-88-8,Miedzyzdroje, Poland. 28-31
August, 2006.
|
26
|
J.M. Ramos, E. Vargas, E.
Gorrostieta, R.J. Romeroy J.C.
Pedraza , "Pneumatic Cylinder
Control PID for Manipulators Robot", The 2006
Conference on Dynamics, Instrumentation and Control. August 13-16, 2006.
Querétaro, Qro.
|
25
|
J.A. Soto, J. E. Vargas y J.C. Pedraza ,"A New
Trajectory Generation Method Using
Vision for a Robot Manipulator", The 2006
Conference on Dynamics, Instrumentation and Control. August 13-16, 2006.
Querétaro, Qro.
|
24
|
Soto Cajiga J. A., Vargas
Soto E.y Pedraza Ortega J. C., "Generación
de Trayectorias paraun Robot
Manipulador Utilizando Procesamiento de Imágenes y Splines",
Memorias en el 2do. Congreso Internacional de Ingeniería. Universidad
Autónoma de Querétaro. ISBN: 968-845-296-3 , Marzo 14-17, 2006,
Querétaro, Qro.
|
23
|
Vargas E., "Metodología en
Proyectos Mecatrónicos Industriales", 1er. Congreso y
Taller Internacional de Mecatrónica, Asociación Mexicana de Ingenieros
Mecánicos y Electricistas A.C., AMIME, Instituto Tecnológico de Mérida,
Universidad Autónoma de Yucatán. 12-14 de Mayo 2005. Mérida, Yucatán.
|
22
|
F.
F. Kiyama and E.
Vargas, "Dynamic Model Analysis of a
Pneumatically Operated Flexible Arm", Proceedings
of the 4th WSEAS International Conference On SIGNAL PROCESSING, ROBOTICS
AND AUTOMATION. ISBN 960-8457-09-2,Salzburg,
Austria. February 2005.
|
21
|
Vargas
E, Rodríguez
W.,”An Innovative
Automatic Machine To Manipulate Sheet of Cardboard", Memorias del 2° Congreso Internacional
en Innovación y Desarrollo Tecnológico,
IEEE Sección Morelos - AMIME.
Noviembre
15-19, 2004, Cuernavaca, Morelos. México
|
20
|
Vargas E., Rodríguez W.,”Mechatronics
Design of an Automatic Machine To Manipulate Sheet of Cardboard" , Proceedings of The International Congress
on Mechatronics andRobotics
MECH&ROB 2004,IEEE Industrial
Electronics Society, European Center for Mechatronics, ISBN
3-938153-30-X,September 13-15,
2004,Aachen. Alemania.
|
19
|
W. Rodriguez, E. Vargas,"Developing a New Automatic Machine to Manipulate Sheet of Cardboard"
, Proceedings of the International Symposium on Robotics and
Automation, ISRA 2004, ISBN 970-9702-00-9, August 25-27, 2004. Querétaro
City.
|
18
|
F. Kiyama, E. Vargas, "Modeling of A Single
Degree of Freedom Flexible Arm Pneumatically Operated",
Proceedings of the International Symposium on Robotics and
Automation, ISRA 2004, ISBN 970-9702-00-9,25-27 August, 2004. Querétaro
City.
|
17
|
Gracios C., Vargas E. y Díaz A., "Model and Simulation
of IMS using FNRTPN and VHDL: A New C.A.D. Method "
, 4th WSEAS Int. Conf. on Soft Computing, Optimization, Simulation
& Manufacturing Systems, SOSM 2004, Miami, Florida, April 21-23, 2004
|
16
|
Gracios C.,E. Vargas Soto, A. Díaz Sánchez ,"Describing an IMS by a
FNRTPN definition: A VHDL approach" ,4th WSEAS Int. Conf.
on Soft Computing, Optimization, Simulation & Manufacturing Systems,
SOSM 2004, Miami, Florida, April 21-23, 2004
|
15
|
Gorrostieta E.,yVargas E. ,"Free Locomotion for
Six Legged Robot" ,3er. WSEAS International Conference on
Signal Processing, Robotics and Automation, ISPRA 2004, ISBN 960-8052-95-5,
February 13-15, Salzburg,
Austria.
2004
|
14
|
Gorrostieta E.,yVargas E., "A Neuro PD Control
Applied for Free Gait on a Six Legged Robot ",
3er. WSEAS International Conference on Signal Processing, Robotics and
Automation (ISPRA 2004) ISBN 960-8052-95-5, February 13-15,Salzburg, Austria, 2004
|
13
|
Gorrostieta E., Vargas E., Cruz L.,
Martínez E., " Simulador de Un Robot Caminante de Seis Patas",
5º. Congreso Internacional de Eléctrica y Electrónica
Aplicada, CIEEA 2003,Instituto
Tecnológico de Durango, Durango, Octubre 7-10, 2003.
|
12
|
Gorrostieta E., Aguado A., Vargas E., "Designing a Neuro
PD
with Gravity Compensation for a Six Legged Robot", Informática 2003, La habana-Cuba, ISBN
959237095-8. Marzo 2003
|
11
|
Vargas E.,
Gorrostieta E. y Pérez A., "Desarrollando una Pata para un Robot Hexápodo" , VII Reunión Internacional de Ingeniería Mecánica Octubre 30- Noviembre
1, 2002. San Luis Potosí, México.
|
10
|
Gorrostieta E., Vargas E., "Diseño de un
Controlador Aplicado a la Generación de Pasos en un Robot Caminante"
, IV Congreso Internacional de Eléctrica y Electrónica Aplicada,
CIEEA 2002, Instituto Tecnológico de Durango, 7-11 de Octubre2002, México
|
9
|
Gorrostieta E.,Vargas E., "Designing a PD
Controlwith GravityCompensation for a six Legged Robot"
, 3th International Symposium on Robotics and Automation,
ISRA2002,Anirob-IEEE, Agosto
2002, Toluca, Edo. De México.
|
8
|
Solano J., Vargas E., Gorrostieta E., Morales C., "Designing
a Six Legged Robot", International Simposium
on Robotics and Automation, ISRA 2000, Monterrey.
|
7
|
E. Vargas, "Metodología Aplicada al Desarrollo
de Máquinas", Congreso Latinoamericano de Instrumentación y
Control de Procesos. Universidad Autónoma de Querétaro. August 2000.
México.
|
6
|
E. Vargas, "Free
Locomotion Gait and Control System for
Quadruple Robots"
, International Congress on Industrial Automation and Material
Science Mexico-Hungary, UAQ, Facultad de Ingeniería, Marzo 1999.
|
5
|
E. Vargas, M.A. Armada, P. González de Santos, "Adaptabilidad de un Robot
Caminante en Terreno Irregular", 3er. Congreso Internacional de
Automatización y Robótica Integrada. Zaragoza, Noviembre 1993. España.
|
4
|
E. Vargas, M.A. Armada, P. González de Santos, "A 3D Graphic Simulator for Task
Planning of a Walking Robot", International Congress on Computer
Systems and Applied Mathematics. Sn. Petersburg, Julio 1993, Rusia.
|
3
|
M.A. Jiménez, E. Vargas, M.A. Armada y P. González de
Santos, "Diseño y Realización
de un Robot Caminante de Cuatro Patas", XIII Congreso
Internacional de Automática y Control. Buenos Aires.
Septiembre 1992, Argentina.
|
2
|
E. Vargas, M.A. Jiménez, M.A. Armada, "A Graphic Simulator for the Telepresence
Station of a Legged Locomotion Robot", 4th International
Symposium on Offshore Robotics and Artificial Intelligence. Marsella,
Diciembre 1991, Francia.
|
1
|
M. A. Jiménez, E. Vargas, M.A. Armada, "Implementación y Simulación de Modos de Caminar para un
Robot de Cuatro Patas", 2do. Congreso Internacional de Robótica,
Zaragoza, Noviembre 1991, España.
|
|